CONVEYOR BELTING
- Home
- Belting
Conveyor Belting
Types:
Fabric
Steel-cord
Heat & oil resistant (FRAS)
Side wall (Pocket conveyor belt)
Chevron range
Antistatic and fire-retardant belt
Low roller resistance belts
Accreditation:
Test safe Australia
SABS 9001
MSHA – US department in mine safety & health
Business assurance DNV.GL
Chevron range
CAPACITY:
WIDTH: UP TO 2700mm SINGLE PASS CURING
ROLL LENGTH: UP TO 760m INDIVIDUAL ROLL
THICKNESS: 50mm OR HIGHER ON REQUEST
EDGE: CUT or MOULDED
Benefits of Conveyor Belting
| Cover Type | Standard & Grade | Min. Tensile Strength (MPa) | Min. Elongation at break (%) | Max. Abrasion loss (mm³) | Application characteristics | Reference Material |
|---|---|---|---|---|---|---|
| General Purpose | AS-M | 24 | 450 | 150 | Suitable for conveying large lumps, sharp edged rugged material | Iron ore, coal, lignite, copper ore, limestone rock etc. |
| General Purpose | AS-N | 17 | 400 | 200 | Suitable for conveying moderately abrasive material | Sand, wood chips etc. |
| Abrasion Resistant | AS-A | 17 | 400 | 70 | Cut & gouge with super abrasion resistance properties | Sharp big lumps with abrasive fine & granular materials |
| Fire Resistant for over ground application | FRA-S | 15 | 350 | 175 | Excellent resistance to flame propagation & low burning rate. | Coal, Minerals & ores |
| Heat Resistant | FRUG-AS | 15 | 350 | 150 | Suitable for medium temperature upto 150°C | Coke, casting sand, clay etc. |
